- 1). Open the refrigerator door to expose the hinges. If there is built-up grime, clean this off with a degreasing cleaner so that you have easy access to the screws.
- 2). Remove all the items stored in the door. Place these aside in a cooler until the project is done.
- 3). Remove the screws from the top and bottom of the door. Set your cordless screwdriver to reverse and take the screws out. Place them aside in a safe place where they will not roll away.
- 4). Remove the hinges from the refrigerator frame. Follow the same procedure to take the screws out. Hold on to them.
- 5). Place the hinges on the opposite side of the door. Center them over the predrilled holes on the frame.
- 6). Insert the screws through the hinges into the frame. Set your cordless screwdriver back to regular and drive the screws through the hinges.
- 7). Hold the door into place between the top and bottom hinges. Insert the screws you put aside earlier and tighten until the door is firmly secured.
- 8). Flip the location of the door handle. Remove the screws from the door handle and move it to the other side over the predrilled holes. Insert the screw, through the handle into the holes and tighten them.
previous post
next post