- 1). Open the hood of the washing machine. Unplug it from the wall or turn off the power to the electrical socket where it is attached.
- 2). Turn the agitator over so it is upside down. You can balance it between your feet if this helps. Apply a few drops of dish washing soap to the inside of the agitator shaft socket.
- 3). Turn the agitator over so it is right side up. Slip it over the agitator shaft. Press firmly on the bottom of the agitator with your hands until it is flush with the bottom of the tub.
- 4). Insert the agitator bolt into the top of the agitator. Tighten with a socket wrench.
- 5). Apply a few drops of soap to the threads on the bottom of the softener dispenser. Thread the dispenser onto the top of the agitator.
- 6). Restore power to the washing machine.
previous post