- 1). Insert your key into the car's ignition switch and turn the key to the "On" position.
- 2). Switch the "PlainView" toggle on the alarm system. This switch is on the system transmitter on your dashboard.
- 3). Press the "PlainView" switch 11 times on your system to program to your remote's first channel. Press it 12 times for the second channel, 13 times for the third and 14 times for the fourth.
- 4). Wait for one, two, three or four chirps from the alarm system, and press and hold the corresponding button on your remote.
- 5). Hold the button until the system chirps again to complete the programming.
previous post