- 1). Plug the headphones into the "HEADPHONES" jack on the back of the keyboard or use two 1/4-inch cables to connect your mixer or powered monitor system to the keyboard's left and right outputs, also located on the back of the instrument.
- 2). Connect the included AC adapter to the "DC 9V" input on the back of the keyboard. Plug the adapter into a wall outlet. If using batteries instead of AC power, make sure the power is off, remove the battery cover on the bottom of the microKORG and install six "AA" batteries as indicated on the diagram next to the battery cover.
- 3). Turn the power switch on. It is located next to the "DC 9V" input. Put your headphones on or power up your mixer or monitors.
- 4). Use the "PROGRAM SELECT" knob along with the "PROGRAM NUMBER" and "BANK SIDE" keys on the top of the synthesizer and play the keyboard to hear the array of sounds available to you.
previous post
next post