- 1). Prepare your computer for the pairing process by setting the computer Bluetooth to the "Discover" mode. Check your computer's instruction guide on how to set the "Discover" mode or to add a Bluetooth device.
- 2). Press and continue holding the "Call Control" button on the Voyager headset. The headset LED will flash red and blue to indicate that the headset is on and in the pairing mode.
- 3). Check your computer's "Discover" mode results, and select the "Voyager" headset. Enter the pass key "0000" when your computer prompts you for the pass key.
- 4). Check the Voyager headset LED; when it flashes blue, the headset has been successfully paired with your computer and is ready for use.
- 1). Prepare your computer for the pairing process by setting the computer Bluetooth to the "Discover" mode. Check your computer's instruction guide on how to set the "Discover" mode or to add a Bluetooth device.
- 2). Press and hold the "Call Control" button on the Voyager headset until the LED turns solid red and the headset turns off.
- 3). Press and hold the "Call Control" button on the Voyager headset a second time until the LED flashes red and blue to indicate that the headset is on and in the pairing mode.
- 4). Check your computer's "Discover" mode results, and select the "Voyager" headset. Enter the pass key "0000" when your computer prompts you for the pass key.
- 5). Check the Voyager headset LED; when it flashes blue, the headset has been successfully paired with your computer and is ready for use.
next post