- 1). Remove the tops and bottoms from the soda cans by cutting them off with the metal snips.
- 2). Cut down one side of each of the soda cans.
- 3). Flatten the soda cans on your working surface by using the wood block to rub over them until they lie flat.
- 4). Join the two small, flat metal sheets together by using the epoxy putty along one side of each sheet to create a large flat metal sheet. Then use the pliers to crimp the edges of the large metal sheet. This is to create a dull edge all the way around in order to prevent someone from getting cut by the windscreen.
- 5). Bend the large metal sheet into a circular shape to create the windscreen that will fit around your alcohol stove.
previous post
next post