- 1). Line up the colored glass and the dichroic glass next to each other, making sure they match in size and shape. If they do not, use a glass cutter to trim away any excess.
- 2). Apply a small amount of fusers glue at the top of the colored glass piece. Add the jump ring, leaving half of the ring on the glass and half hanging over. The area of the ring not split should be the part that is hanging over. Let the glue dry for at least 30 minutes before moving on to the next step.
- 3). Apply a small amount of fusers glue in the center of the colored glass, then place the dichroic glass on top, sandwiching the two pieces.
- 4). Fuse the glass pendant in a kiln, letting it go for 25 minutes at 500 degrees, 25 minutes at 800 degrees, 20 minutes at 1,000 degrees, and 10 minutes at 1,500 degrees.
- 5). Allowing pendant to cool, then polish with a rag.
previous post