- 1). Plug the connector on the AC adapter into the port on the back of the Energizer charger. Plug the other end of the adapter into an electrical outlet.
- 2). Remove any jackets or sleeves you may have installed on your Wii remotes.
- 3). Press the battery door release clip on the back of the Wii remote and remove the battery door.
- 4). Place the Energizer battery pack in the battery compartment. Place the battery pack so the metal contacts are closest to the bottom edge of the remote.
- 5). Place the Energizer battery door on the back of the Wii remote. The metal contacts on the battery pack will fit through a hole in the door.
- 6). Repeat steps 2 through 5 for the second remote.
- 7). Set the Wii remotes into the slot on the charging dock. Arrange the lanyard on the remote so it lays underneath and sticks out the front of the charging dock.
previous post