- Paint alone can be used to add the appearance of texture to Sheetrock walls. The process typically includes applying a base coat of paint to a wall, then applying a second slightly lighter coat and manipulating it to create the desired appearance. Sponges, rags, brushes, newspapers and even plastic bags are among the tools that can be used to manipulate paint. Among the types of finishes that can be achieved are wood grain, grasscloth, plaster and terra cotta. It is important to gain an understanding of your chosen technique and practice it before starting your project.
- Paints manufactured with texture mixed into them add another dimension. Using these types of paints results in actual texture that you can feel as opposed to regular paints, which, no matter how you manipulate them, create a flat finish with only the appearance of texture. Textured paints can be brushed or rolled on, like other paints, or specialized rollers and other tools can be used to add even more dimension.
- This method of adding texture to Sheetrock goes beyond paint. Texturing material, which is manufactured by some of the same companies that make joint compound is applied to the wall with a spray gun, allowed to dry partially and then flattened, or knocked down. The final texture will vary depending on the method and type of tools used to flatten the material. After the texture is knocked down, it can be further manipulated with sponges, brooms or other items to create patterns. Practice the process and experiment on scrap plywood before applying the texture to your walls.
- Rather than using a spray gun, texture can also be added to Sheetrock walls using a roller. In this case, texturing material or diluted joint compound is rolled onto walls much the way paint is applied. Specialized rollers can be used to add another dimension of texture. Again, it is important to practice your technique before tackling an entire room.
previous post