- 1). Disconnect wiring from the negative terminal of each battery prior to starting.
- 2). Measure all wire runs and cut wires to appropriate lengths.
- 3). Route wires, strip insulation from the ends and attach ring terminals.
- 4). Connect inline fuses to each battery positive terminal.
- 5). Connect a wire from each inline fuse to one of the positive terminals of the integrator.
- 6). Connect the ground terminal of the integrator to a ground terminal or block in the boat.
- 7). Connect any optional switches or indicators per the unit's instructions.
- 8). Reconnect the battery ground cables.
previous post
next post