- 1). Turn off the television and unplug it from the wall outlet. Allow 30 minutes for the monitor to cool prior to replacing the lamp, if the television was on.
- 2). Remove the cover on the left side of the front of the television, below the screen. To remove, pull the upper-left side of the cover forward. Then pull both sides of the cover straight back and remove the cover.
- 3). Loosen and remove the four screws securing the lamp cover plate. Remove the lamp cover plate.
- 4). Remove the two screws securing the lamp and then pull the old lamp out.
- 5). Insert the new lamp into the lamp compartment and secure with the two screws that were removed from the old lamp.
- 6). Replace the lamp cover plate and secure it with the two screws that were removed.
- 7). Align the cover back with the bottom of the television and push it onto the television to secure it in place.
- 8). Plug the television back into the wall outlet.
previous post