Generally speaking, taking apart a pocket watch could be carried out in two ways. Although there are many unexpected happens which may get your watches damaged, some useful tips are still needed so much. Among those occasions at some point, it is most likely your pocket watch has screws in the back.

For example, sometimes, your pocket watches just snap together, but the situation is uncommon. However, it always works methodically to ensure that you can rebuild it when the time comes, regardless of taking your watch apart for fun or to repair a problem. In fact, rebuilding your watch could also be a careful and delicate job which may need much time and energy. Here are some tips to help you to learn how to take apart your cheap pocket watches properly.

1. Actually, you may need to check your pocket watch wholly before starting to take it apart. It's critical to ensure that the pocket watch is closed before the job. We've found it important to involve the operator in the following ways: Make sure that the pocket watch should be snapped shut so that it does not pop open when you flip it over to the backside and find the screws that hold it together. This action is important and is often neglected by those who are prepared to take it apart.

2. Unscrewing the screws is an important aspect of almost process. Keep in mind that do the action while keeping your grip tight on the watch. As a result, it's important to act delicately and carefully. Sometimes, if you let go of the watch, it may fall into pieces. As a result, it can damage the interior workings and prevent them from rebuilding later. In the process of the step, try to act as the manual which the manufacturer could offer.

3. Next just remove the back of the watch very carefully and delicately. The step needs slow action because you do not want to lose any of the pieces that are inside. Then you could also see the inner workings of the watch. If you are attempting to repair your watch, you should now find parts that are jammed or bent. The action could be done depending on the situation. However, keep in mind that that taking these pieces out may break or damage your cheap watches if you have little experience in doing this.

4. If you have just started and have no experience as yet, you could refer to the manual or ask for experts for advice. Next step is to use the craft tweezers to gently lift out the pieces. You may see many little things exposed. If you don't want to lose any of them, it's necessary to place them on a flat surface. Then you could remove and replace a single piece once at first, by doing this, you may be more comfortable and experienced when you do reassembling job. It requires a good deal of skill to operate effectively and is probably best reserved for dedicated operation.