- 1). Ensure that the Echo weed trimmer is turned off. Let it sit and cool down before attempting to wind the nylon line as a recently used weed trimmer may be too hot and cause burns.
- 2). Press the tab on the weed trimmer head labeled "Push" to pull the cover off of the head. Set the cover aside.
- 3). Pull out the nylon line completely from the head. Untangle and smooth out any kinks in the line. Remove debris that may have gotten caught in the line or inside the line hub.
- 4). Wrap the nylon line around the line hub ensuring even distribution. Feed the end of the nylon line through the eyelet on the outside of the cover. Replace the line head inside the cover and align the holes of the head with the pegs of the cover.
- 5). Turn the Echo weed trimmer on to ensure that the nylon line is now wound correctly.
previous post